Accessories; Safety Testing Approvals - Tuthill Fill-Rite 700V Serie Manuel D'installation, Fonctionnement Et Securite

Fluid leakage.
Pump hums but
will not operate.
Bold text indicates repairs that are not serviceable by the owner; pump must be returned to
the point of purchase for repairs.
* Repairs marked with an asterisk (*) will require Repair Kit #700KTF2689. This kit includes a
replacement rotor and new vanes, as well as a number of other important seals and
components to complete the repair. Details of this kit are on page 13.

Accessories

A wide variety of accessories are available to help you maximize the performance of your Fill-
Rite pump. Listed below are the applicable available accessories for your specific product.
Part Number
1200KTF7018
F1810PM0
1210KTF7019
F1810HM0
F4010PM0
F4030PM0
700ACCF7017
TH13
700KTH1067
FRH10012
FRH10014
700F1353
FRH07512
FRH07514
N075UMN11
N075UAU10
N075DAU10
N100UMN11
KTH1402
N100DAU10
FRNA075DAU10
FRNA100DAU00
Please contact your authorized Fill-Rite distributor to purchase the accessories you need.

Safety Testing Approvals

The Fill-Rite line of pumps have been safety tested for compliance to
the standards set forth by UL Laboratories.
1. Bad o-ring gasket.
2. Dirty shaft seal.
3. Bad shaft seal.
4. Incompatible fluid.
5. Loose fasteners.
1. Dirt in pump cavity.
2. Motor failure.
3. Broken key.
Description
¾" Filter Kit (Particulate)
Replacement Particulate Filter Element
¾" Filter Kit (Hydrosorb)
Replacement Hydrosorb Filter Element
1" Filter Kit (Particulate 10 micron)
1" Filter Kit (Particulate 30 micron)
1" Filter Head
Island Pedestal Mount Kit
Anti-Siphon Kit
1" Hose (12')
1" Hose (14')
1" Hose (18')
¾" Hose (12')
¾" Hose (14')
¾" Nozzle
¾" Nozzle, Automatic, Unleaded Spout
¾" Nozzle, Automatic, Diesel Spout
1" Nozzle Kit, Manual, Leaded Spout
1"Auto Shut Off Nozzle (Ultra Hi-Flow Diesel)
1"Auto Shut Off Nozzle (High Flow Diesel)
¾" Auto Shut Off Nozzle (Arctic Duty – Diesel)
1" Auto Shut Off Nozzle (Arctic Duty – Diesel)
Check all o-ring gaskets.
Clean seal & seal cavity.
Replace seal.
Refer wetted parts list to fluid
manufacturer.
Tighten fasteners.
Clean out pump cavity.
Return to place of purchase.
Remove all debris & replace key.
11
700 701 710
X X
X X
X X
X X
X
X
X
X X X
X X X
X
X
X
X X
X X
X X
X X
X X
X
X
X
X X
X
711
X
X
X
X
X
X
X
X
X
X
X
X