Delete Memory - Nice MORX Mode D'emploi

Table "B3" Enter the combination valid for the two outputs
This procedure allows a single combination valid both for output N° 1 and for output
n° 2 to be entered.
1. Press the small button on the DECODER; you now have 30 seconds in which to enter the combination
on the KEYPAD.
(During this period tones will be emitted at regular intervals)
2. Enter the required combination in less than 30 seconds (minimum 1, maximum 9 digits)
3. Press key
Table "B4"

Delete memory

This operation deletes all the data contained in the memory, thereby making it possible
to choose between the EASY and PROFESSIONAL modes again
1. Press and hold down the small button on the DECODER, the LED lights up for 3 seconds
and then flashes 3 times.
2. Release the button exactly during the third flash.
N.B.: If the operation was performed correctly, the LED will flash 5 times after a few moments.
16
once and key once
and (Relays 1 and 2) Example
1234
Example