Nice MORX Mode D'emploi page 19

Table "C2" Delete memory from the KEYPAD
This function deletes all the data contained in the memory.
The "Programming password" must first be entered.
1. Enter the programming password
2. Press
3. Enter
4. Press
5. Enter
6. Press
7. Enter
8. Press
N.B.: If the operation was successful 3 tones will be heard
Table "C3" Enter a combination valid only for output
This function allows a combination valid only for output N° 1 to be entered.
Repeat the operation to enter other combinations.
1. Enter the programming password
2. Press
3. Enter
4. Press
5. Enter the required combination (minimum 1, maximum 9 digits)
6. Press
7. Enter the same combination a second time
8. Press
N.B.: If the operation was successful 3 tones will be heard
18
to confirm the password
to select the operation
to confirm
for the first confirmation
to confirm
for the second confirmation
to confirm
to confirm the password
to select the operation
to confirm
to confirm
to confirm
(Relay 1)
Example
Example
1234
1234