Overall description
Introduction
The HCV range from Dantherm is a home ventilation unit which is designed to supply fresh
air to residential homes, by exchanging heat from outgoing air to incoming air, resulting in
energy efficient ventilation with low heat energy loss .
These units are designed for installation, in dry surroundings, with temperatures >12°C . e .g .
utility room or similar heated rooms .
The air flow paths can be electronically swapped, providing ability to route the connected
ducts, either to the right or to the left .
Product
This illustrates the unit .
illustration
Pos . Part
1
2
3
4
5
6
7
8
9
10
11
Product description
Illustration
Silencer (optional)
Control panel
Filter 1
Filter 2
Main PCB
1
Fanbox 1
Fanbox 2
Bypass
Heat exchanger
Water drain mode B
Water drain mode A
2
3
5
6
8
9
10
11
Fig . 1
4
7
7