Product Information - Hilti DSH 600 Mode D'emploi

Primer bulb
Full-throttle jet adjusting screw
Idling jet adjusting screw
Idling adjusting screw
Fuel mixture
Fuel tank cap turning direction (to open)
Choke (only on DSH 600)
1.4 Adhesive labels on the machine
Warning signs
Warning: Flying sparks present a fire risk.
Warning: Risk of kickback.
Warning: Don't inhale toxic vapors or exhaust fumes.
Maximum spindle speed
Warning: Hot surface
Prohibition signs
Don't use toothed cutting discs.
Don't use damaged cutting discs.
Smoking and naked flames prohibited.

1.5 Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification plate.
2 English
Printed: 30.03.2017 | Doc-Nr: PUB / 5341985 / 000 / 00