Orbit Merret OM 653UQC Mode D'emploi page 41

6.1.2f SELECTION OF STOPWATCH/TIMER RESETTING
INPUT CLEAR
CHANNE. CONFIG
OUTPUT. EXT. I N.
SERVIC. KEYS
6.1.2g AUTOMATIC SETTING OF THE INPUTS
INPUT CLEAR
CHANNE. CONFIG
OUTPUT. EXT. I N.
SERVIC. KEYS
SET. V. CLEAR DEF
MODE ST. CLR.
M. TIME ST. CLR.
FILTER
M. S TART
M. S TOP
SETTIN.
TYPE A
LEVEL. A
TYPE B
LEVEL. B
POLAR.
BACKUP
SET. v .
MODE
M. TIME
FILTER
M. S TART
M. STOP
SETTIN.
TYPE A
LEVEL. A
TYPE B
LEVEL. B
POLAR.
BACKUP
CONFIGURATION PROFI
M. STOP Selection of stopwatch
resetting
- menu of the resetting option is accessible only
in the stopwatch/timer regime
CLEAR Stopwatch/timer is reset
through input „Clear"
ST. CLR. Stopwatch/timer is stopped
and reset through input
„Clear"
STOP
Stopwatch/timer is stopped
through input „Clear"
SETTIN. Automatic setting of the
inputs
- it is posible to choose in the menu between
automatic or manual setting for input A and B
- for automatic detection the minimum frequency
required is 10 Hz
start of automatic input setting
manual input setting - down
manual input setting - up
confirm the setting and proceed to
second input (short key stroke)
to copy the setting of Input A to Input B
(long key stroke)
DEF
= NPN.CON
MODE D'EMPLOI OM 653UQC | 41
6.
H