Orbit Merret OM 653UQC Mode D'emploi page 18

5. CONFIGURATION LIGHT
M. S TART
M. S TART
18 | MODE D'EMPLOI OM 653UQC
CONTIN. CONTAC.
C. R UN. S T. CLR. R UN
>
M. S ATRT
Selection of stopwatch/timer
control
- menu for time setting is accessible only in the
stopwatch/timer mode
CONTIN.
Stopwatch/timer is running
constantly if the instrument
is turned on
CONTAC. Stopwatch/timer is running
upon contact making
EDGE Stopwatch/timer is controlled
by the priming signal edge
- time is set off by the edge (by the signal passing
across the comparing level) and stopped by the
next edge
RUn . ST. C . Stopwatch/timer is controlled
and reset by the edge of the
priming signal
- time is set off by the edge (by the signal passing
across the comparing level) and stopped by the
next edge
Selection of stopwatch control > EDGE
CONTAC. EDGE
CLEAR ST. CLR.
M. STOP Selection of stopwatch
resetting
- menu of the resetting option is accessible only
in the stopwatch/timer regime
DEF
= CLEAR
Selection of type of stopwatch resetting > St. CLR.
CLEAR ST. CLR.
EDGE RUN. S T. C .
>
CL. R U. R E. RUN
C. R Un . ST.
priming signal
- time is set off by the edge (by the signal passing
across the comparing level) and stopped by the
next edge
CLR. R UN.
priming signal
CL. R U. R E.
priming signal, the cycle is repeated with every
other edge
RUN
DEF
= CONTAC.
M. STOP

STOP

CLEAR
ST. CLR.
STOP
LEVEL. A


Stopwatch/timer is controlled
and reset by the edge of the
Stopwatch/timer is reset and
set off by the edge of the
Stopwatch/timer is reset and
set off by the edge of the
Stopwatch/timer is only set off
by the edge
Example
Stopwatch/timer is reset
through input „Clear"
Stopwatch/timer is stopped
and reset through input „Clear"
Stopwatch/timer is stopped
through input „Clear"
Example