Orbit Merret OM 653UQC Mode D'emploi page 39

6.1.2d SELECTION OF INPUT FILTER PARAMETERS
2C
INPUT CLEAR
CHANNE. CONFIG
OUTPUT. EXT. I N.
SERVIC. KEYS
SET. v . OFF
MODE 1000
M. TIME 100
FILTER 40 DEF
M. S TART 5
M. STOP
SETTIN.
TYPE A
LEVEL. A
TYPE B
LEVEL. B
POLAR.
BACKUP
CONFIGURATION PROFI
VOLBA DOBY MĚŘENÍ/ČASOVÉ ZÁKLADNY
FILTER
Selection of digital input
filter
- digital filter may suppress unwanted interfering
impulses (e.g. relay backswings) on the input
signal. The set parameter gives maximum
possible frequency (Hz) of the instrument,
which the instrument w/o limitatio
- for pulse duty cycle of50% - equal duration of
Hi and Lo level"
- in case if intereference the use of input filter
is recommended
!
When accessing upon contact and available
maximum input frequency we recommend
using filter
MODE D'EMPLOI OM 653UQC | 39
6.