Orbit Merret OM 653UQC Mode D'emploi page 29

FIRM. YES
FIRM.
- in case of incorrect setting or calibration it is
possible to return to manufacture setting. Prior
execution of the changes you will be asked to
confirm your selection (YES)
Restoration of manufacture setting > FIRM.
FIRM.
USER YES
USER
- downloading user setting of the instrument, i.e.
setting which was stored under item SERVIC./
RESTOR./SAVE
Restoration of user setting > USER.
USER.
!
Do not perform restoration of user setting
(USER) prior to its saving in Profi menu


Restoration of the instrument
manufacture setting
YES USER.


Restoration of the instrument
user setting
YES PAS. LI.
CONFIGURATION LIGHT 5.
- reading the manufacture calibration and original
setting of items in the menu
MODE D'EMPLOI OM 653UQC | 29
Example
Example