Setting The Alarm; Volume & Sound; Tone - PERFECTPRO DIGITUBE Manuel De L'utilisateur

6. Press the SELECT-INFO button to confirm. The day flashes.
7. Press the TUNING or buttons to set the current day.
8. Press the SELECT-INFO button to confirm. The month flashes.
9. Press the TUNING or buttons to set the current month.
10. Press the SELECT-INFO button to confirm. The year flashes.
11. Press the TUNING or buttons to set the current year.
12. Press the SELECT-INFO button to confirm. "Synclock on" flashes.
13. Press the TUNING or buttons to choose either "Synclock on" or "Synclock off".
14. Press the SELECT-INFO button to confirm. Setting finish.
RDS time synchronisation
"Synclock on" option during the time setting, the time will be automatically updated. Time synchronisation can take several minutes.
The automatic time setting is always activated when the radio is switched from standby to FM broadcasting and receives a RDS
station.
Press the SELECT-INFO button to confirm.

SETTING THE ALARM

The alarm can only be set when the radio is in standby mode. If no buttons are pressed for 5 seconds, the radio will exit the alarm
setup and the setting is cancelled.
1. Press the MENU button for about 3 seconds, and then press the MENU button again until the display shows "ALARM SET".
2. Press the SELECT-INFO button. The hour digits flash on the display.
3. Press the TUNING or buttons to set the hour
4. Press the SELECT-INFO button to confirm. The minute digits flash.
5. Press the TUNING or buttons to set the minute.
6. Press the SELECT-INFO button to confirm. "ALARM SOURCE" displayed.
7. Press the TUNING or buttons to choose among "FM RADIO", "BUZZER" and "DAB".
8. If "FM RADIO" is selected, the last listened station will be played when the alarm rings.
9. "VOL XX" displayed. Press the TUNING or
10. Press the SELECT-INFO button to confirm. Setting finish.
19
buttons to change the alarm volume.
Switching on/ off the alarm
1. To switch the alarm on, press the SELECT-INFO button and hold for 2 seconds. The alarm icon will be shown at the top left
corner.
2. To switch the alarm off, press the SELECT-INFO button again and hold for 2 seconds. The alarm icon will be disappear.
3. To turn off the alarm when it buzzes, simply press the On/Off button.
VOLUME & SOUND
To adjust the volume, simply press the Volume – or + buttons when playing the DAB / FM radio / Bluetooth / AUX IN mode.
The level of volume (from 00 to 40 the loudest) will be shown on the LCD Display.
Note: When playing on batteries; if the energy level of the batteries is too low, sound will distort on higher volume.
360 DEGREES SOUND
The unique Neodymium speaker located on top of the radio provides a 360 degrees sound image.
Suggestion: If preferred, place the radio in a corner or close to a wall for additional sound reflection.

TONE

The TONE function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to switch on the radio.
2. Press the TONE button, the display shows "BASS 0"
3. Press Volume – or + buttons to set the desire Bass level.
4. Press the SELECT-INFO button to confirm, then "TREBLE 0" displayed.
5. Press Volume – or + buttons to set the desire Treble level.
6. Press the SELECT-INFO button to confirm, and display returned to normal.
GB
G B
20