Restart Bluetooth Pairing; Aux-In Mode; Setting Clock; Key Lock - PERFECTPRO Bluetube Manuel De L'utilisateur

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the Menu / Tone button to enter the system setting.
2. Press the or button until "Bluetooth" is displayed; press the Select / Info button.
3. Press the or button to select "Disconnect" options, and press the Select / Info button to select the setting.
4. The LCD display will show "Not connected" and it will disconnect the current connection with the mobile device. Then Bluetube
speaker's Bluetooth is free for any other mobile device connection as it is in "discoverable mode" now.
NOTE: "Disconnect" is the option that forces the Bluetooth of this Bluetube speaker to disconnect from your mobile device and enter
the "discoverable mode". This is the way to allow Bluetooth pairing to another device. If no new device will be paired, the Bluetooth
will automatically try to connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is no signal from Bluetooth for a period of over 15
minutes, the Bluetube speaker will automatically switch to standby mode. Pressing the On/Off button will "wake up" the unit.

AUX-IN MODE

A 3.5mm stereo AUX-IN socket is provided on the side behind the rubber cover, for connecting an external audio device such as a
MP3 player or CD player (not included with this speaker).
1. Connect an audio source to the AUX-IN socket
2. Press the Source / Lock button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume of both the Bluetube speaker and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the sockets and Bluetube speaker.
NOTE: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from entering the Bluetube speaker. Keep
the rubber cover well closed under these conditions.
NOTE: The Auto-Power management function will be activated in the AUX-IN mode. If there is no signal from the AUX-IN socket for
a period over 15 minutes, the unit will automatically switch to standby mode. The operation indicator and the LCD will go off in such
case. Pressing the On/Off button will "wake up" the unit.
15

SETTING CLOCK

The clock can only be set when the Bluetube speaker is in standby mode. If no buttons are pressed for 5 seconds, the Bluetube
speaker will exit the clock setup and the setting is cancelled.
1. Press and hold the Menu / Tone button and the display will show "CLOCK SET".
2. Press the Select / Info button. The hour digits flash on the display.
3. Press the or button to set the hour.
4. Press the Select / Info button to confirm, then the minute digits flash.
5. Press the or button to set the minute.
6. Press the Select / Info button to confirm, then the day flashes on the display.
7. Press the or button to set the current day.
8. Press the Select / Info button to confirm, then the month flashes.
9. Press the or button to set the current month.
10. Press the Select / Info button to confirm, the year will then flash on the display.
11. Press the or button to set the current year.
12. Press the Select / Info button to confirm and finish the clock setting.
NOTE: the clock can only be set manually as there is no external signal or data adjusting the clock's settings.

KEY LOCK

The Bluetube speaker supports a Key Lock-function in all modes (Standby, Bluetooth and AUX-IN). The Key Lock-function is used
to prevent unintentional operation of the Bluetube speaker. When the "Key Lock" function is activated all function buttons will be
disabled.
1. Press and hold the Source / Lock button for about 3 seconds, the LCD will display "Locked".
2. When buttons are locked, the functions of the Bluetube speaker will be temporary disabled until it has been unlocked. During
this moment, the Bluetube speaker will only light up the backlight for a few seconds and show "Locked" in display.
3. Press and hold the Source / Lock button for 3 seconds again, the Bluetube speaker will display "Unlocked", and the Key Lock-
function will be disabled.
GB
16