Appendix 8: Optional Blower And Thermodisc Installation - Empire Comfort Systems Gateway 1700 Mode D'emploi

APPENDIx 8: OPTIONAL BLOWER AND THERMODISC INSTALLATION

A blower and a thermodisc, sold separately, can be installed on the stove. The installation of
the blower is identical for a stove on legs or pedestal. Thermodisc allows the blower to operate
only when the stove is hot enough. See the instructions provided with the thermodisc for more
details.
1. Remove the backplate by cutting the knockouts with pliers.
2. Screw the blower (D) in place using the screws (C) included in the installation manual. Screw
the thermodisc (A) with the screws (B) supplied with the thermodisc on the back of the stove.
Ensure that the blower's power cord is not in contact with any surface of the stove to
prevent electrical shock or fire damage. Do not run the power cord beneath the stove.
Page 58
MICROJOINTS
A
C
2x
D
B
2x