Manual Drive; Declaration Of Conformity - Erreka Puma Mode D'emploi

DESCRIPTION OF THE PRODUCT
5

MANUAL DRIVE

In the event of need, the gate may be operated manually:
Unlocking for manual operation
1 Turn the cover (1) 180º to reveal the cylinder.
2 Introduce the key (2) and turn clockwise
without forcing it.

The cylinder will protrude a few millimetres,
pushed by a spring.
3 Turn the handle (3) anti-clockwise 270º until it
reaches the stopper, without forcing it.

The gate can now be operated manually.
6

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the PUMA operator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 89/392 EEC and successive
modifications.
The PUMA operator allows us to carry out installations
in line with the standards EN 13241-1 and EN 12453.
46
Installation Manual
Motorised operation locking
1 Turn the handle (3) anti-clockwise 270º until it
reaches the stopper, without forcing it. Turn
the key anti-clockwise and remove it.
2 Push the cylinder (4) inwards and turn the cover
(1) to cover it.
3
3 Move the gate manually until the operator
locks.
The PUMA operator complies with safety legislation in
line with the following directives and standards:
• 73/23 EEC and successive modification 93/68 EEC
• 89/366 EEC and successive modifications 92/31 EEC
and 93/68 EEC
• UNE-EN 60335-1
3