Wire Routing - Franklin Electric SubDrive75/2W MonoDrive Mode D'emploi

Wire Routing

Separate input power and motor
wiring by at least 8" (20.3 cm)
Input
power
GND
When possible DO NOT run drive input
power or motor wires in parallel with house wiring.
Avoid running out-building wires in parallel with motor wires.
4
Output lead to motor to
exit house as soon as possible.
GND
Service Entrance
Panel
GND
Motor
GND
DO NOT run input power
and motor wires together.
Separate by at least 8" (20.3 cm)
8"
20.3 cm
GND
Input
power
GND
Motor
Pump
Motor