Configuration Of Internal Parameters (Setup Mode) - Promax 26 Mode D'emploi

USER'S MANUAL. PROMAX-26

4.2.1 Configuration of internal parameters (SETUP MODE)

To access the configuration menu for the internal parameters of the device,
press the direct access key to access the main menu from any operational mode
(MODEM, TV, GTOR, CONFIG, etc.). Then select the SETUP [F5] option from the
lower selection box.
The configuration menu for internal functions of the device is made up of the
following page of options.
Figure 5. - Configuration of internal parameters
In order to modify the status of a parameter, press the navigation buttons [7]
until the arrow marks it. Then, activate it by pressing the selection button [8]. The
navigation buttons [7] can be used to modify the value from among the available
options. Finally, to validate the new status, press the selection button [8] again.
The internal parameter configuration page allows to set the following
parameters:
a) TIME
To change the time, select the TIME field and enter the time using the alphanumeric
keypad. First, the hour field is modified. Later, press the [10]
minutes. Last, press the selection button [8] to confirm the new time.
b) DATE
To modify the date select the DATE field. First, the day field is modified. Next press
the [10] , key. Enter the month and lastly, the year.
c) LANGUAGE
This field permits to select the language.
02/2007
. key to enter the
Page 19