Logger Function - Promax 26 Mode D'emploi

By means of the navigation buttons [7] and pressing the MODEM [F3] or
SCAN [F4] option could be analysed each one of the channels found.
4.2.3.2

LOGGER function

The LOGGER function makes possible a record of the measurements acquired
for the upstream and downstream data links.
Downstream:
Upstream:
1
(see the "EDIT CHANNEL PLAN" option in the 4.2.2 CONFIG Operation Mode section)
Page 28
Figure 14.- Search function
- Channel power measurement
- MER and BER measurement
- Frequency measurement for the channel corresponding
to the active channel plan
- Symbol rate
- Power level verification
- Attenuation at CMTS
- Frequency and bandwidth
- Symbol rate
- Communications test
USER'S MANUAL. PROMAX-26
1
02/2007