Sissel SITFIT Mode D'emploi page 7

3
The needle pump permits the
addition or removal of air whenever
desired. Just screw the tip of the needle onto
the pump and carefully insert into the valve. Do this
in a careful manner in order to avoid any damage of the
SISSEL SITFIT s outer membrane.
® ®
Pressing your knee or lower arm onto the SISSEL
around the valve (this avoids a puncturing of the product). Now insert the pump and add air. To
deflate simply the needle into the valve, hold slightly sideways until the desired amount of air has
escaped.
4
Depending on the surrounding temperature the SISSEL
it adjusts to your body temperature after a few minutes. Our attractive velour covers, available in
many colors, create a pleasant feel instantly.
The SISSEL
of phthalates. Instead we use CITROFOL
softener based on citric acid. It is pharmacologically and eco-toxicologically
harmless and is used by the food industry.
Note
I
Keep the application area free of pointy or sharp edges.
I Avoid any difficult exercises or experiments with increased risk.
I CITROFOL BII as raw material features a high tolerance to light. However, to maintain the color
®
brilliance we recommend not to expose your SISSEL
time.
I To clean wipe, your SISSEL
or standard disinfectant.
I Weight tested up to 138 kg / approx. 300 lbs
Scope of delivery
One of the following products
I
SISSEL SITFIT Plus with pump,
® ®
I SISSEL SITFIT 36 cm,
® ®
I SISSEL SITFIT 33 cm
® ®
PLUS exercise poster, user's manual, gift box
SITFIT
®
SITFIT is made in Germany. The PVC used for the product is free
® ®
®
SITFIT with a moist towel, water and using a mild household cleaner
® ®
is helpful because it creates a bulge
®
SITFIT might feel a bit cool at first but
® ®
BII as plasticizer, a high-quality PVC
®
SITFIT to direct sunlight for an extended
®