Explanation Of Label Nomenclature - TEUFELBERGER treeMOTION Mode D'emploi

to be made to the equipment without the manufacturer's written consent. The equipment shall
not be used outside its limitations or for any purpose other than that for which it is intended. If
resold to another country, the seller must provide user instructions in the appropriate language.
PPE systems must be thoroughly inspected by a competent person at regular intervals.
TEUFELBERGER recommend that a competent person carries out a thorough inspection at
least every 6 months. Check national regulations for local requirements.
RESPONSIBILITY
It is the user's responsibility to ensure:
Adequate physical and mental condition to use the harness in normal and emergency
�
situations.
That a relevant risk assessment is in place for the work to be carried out, including emer-
�
geny contingencies and taking correct first aid into consideration.
That all components of the system are compatible with one another.
�

1.1 EXPLANATION OF LABEL NOMENCLATURE

Product name
EU directive 89/686/EEC of 21.12.1989 on
the approximation of the laws of
the Member States relating to
personal protective equipment.
ANSI Z 133.1-2006: US-american standard
for arboricultural operations
Controll-no.: The last two digits tell the year
of manufacture
Ser. No. Year of manufacture - serial number
Max. load: maximum rated load including tools and equipment
Size: Size of the harness
CE 0408 The CE mark certifies compliance with the fundamental requirements of 89/686/
EEC Personal Protection Equipment). The number identifies the testing institute
(e.g., 0408 for TÜV Austria Services GmbH, Krugerstraße 16, 1015 Vienna, Austria).
Manufacturer
Indication informing the user that it is necessary to read the User Instructions.
The European standard symbols for washing of textiles and their care are used.
Does not comply with any standards other than those stated on the product label!
GENERAL / USE
5