MODES OF USE / REPLACEMENT PARTS
Use as Sit Harness on the basis of EN 813
Suspended – central attachment on rope bridge (10). Doubled (running) rope system with
�
friction hitch adjuster.
Suspended – central attachment on rope bridge (10). Single rope descent with mechanical
�
adjuster.
Suspended – Attachment to both front D rings (8). Doubled (running) rope system with
�
friction hitch adjuster.
pic. 12
4. REPLACEMENT PARTS
Product specific instructions are included with every replacement part.
Upper Assembly treeMOTION 7333211
�
Replacement Rope Bridge 7333212
�
Hip-Front D Replacement Kit 7333208
�
Leg Loops (right: 7333206 / left: 7333207)
�
Shoulder straps and load bearing assembly (Part no. 7333211)
Upper harness (shoulder straps and load carrying assembly) are non-
PPE elements and not intended for fall arrest
Replacement rope bridge (Part no. 7333212)
If the green mantle is ruptured by any means (e.g. cutting, heating
or abrasion) or a tactile inspection of the kern identifies changes in
diameter or rope properties, the rope bridge shall be replaced imme-
diately by, or under the supervision of, a competent person.
For replacement, it is imperative that you use only the replacement
pic. 13
Replacement Leg Padding (1 pair) 7333209
�
Comfort Back Padding 7359960
�
Gear Loops for treeMOTION 7333213
�
Standard Back Padding 7333214
�
pic. 14
pic. 15
pic. 16
11