How To Put On Treemotion; And Obtain A Good Fit - TEUFELBERGER treeMOTION Mode D'emploi

2.4. HOW TO PUT ON treeMOTION ...

Check that the waist belt and leg loop buckles are undone (1, 9)
pic. 2
a) Hold the harness
by the back support

2.5. ... AND OBTAIN A GOOD FIT

1) Adjust waist belt webbing (1) and stow the end under the elastic loop.
2) Adjust webbing in each leg loop (17) and stow the end under the elastic loops.
3) Adjust webbing in the adjustable links (5) and stow the end under the elastic loops
4) Adjust the length of the rope bridge (10) ensuring the stopper knots are properly tied,
dressed and set before going 'on rope'
I II III
III
II
The climber shall fully equip the harness for the task to be performed, then hang in suspension
and adopt a range of work positions to ensure that the harness is properly fitted, comfortable
and suitable for the task. Leg and back paddings are attached to the harness by hook-and-
loop fastener and can be removed for cleaning and put back in place.
pic. 3
b) Step inside the
rope bridge (10) and
the leg loops (17)
I
III
II
pic. 6
pic. 4
c) Securely close the
waist belt buckle (1)
IV
USE
pic. 5
d) Securely close the
leg loop buckles (9)
pic. 7
9