Inner Crosspiece - AEG DD 9863 Mode D'emploi

• DD 9863
Pull the panel (FRONT SIDE) downward with decision, unscrew
safety knob and unhook it from the rear hinge. Fig. 3a
Proceed in the reverse order when refitting it.
Fig. 3a
Clean the perimeter air suction panels as often as the grease filters
(for more information about gentle cleaning methods, read the
paragraph "Cleaning" in the pages that follow).
Inner crosspiece - DD 9893
The inner crosspiece should be removed in order to access the
grease filters and the inside of the cooker hood (for example: when
performing maintenance work on the carbon filters).
To remove it (depending on the model), proceed as follows,Fig. 4:
Warning! Keep the crosspiece supported during removal/fitting
procedures, in order to prevent it from falling and damaging other
objects.
Remove it from its position using the spring release system.
Re-fit the crosspieces by carrying out the above steps in reverse.
Warning! Make sure the crosspiece is fixed to the cooker hood
properly.
Fig. 4
71