Preparation - Gaspardo SP SPRINT Manuel D'emploi Et Entretien

ENGLISH

4.7 PREPARATION

In all the models the seeding elements are connected independently
to the frame by means of hinged parallelogram mechanisms, though
with some particular features depending on the type of seed to be
distributed and the characteristics of the ground being worked on.
fi g. 33
fi g. 34
fi g. 35
1
66 - EN
USE AND MAINTENANCE
a) seeding elements for deep seed planting
two different types of element are available for the medium depth
equipment in relation to the roughness of the seed planting bed:
-
-
For different soils, 2 different types of seed covering element are
available (fi g. 35):
1) farmfl ex wheel (Ø=370 mm) recommended for damp and sandy
2) rubber "V" wheels more suitable for damp and "diffi cult" soils.
b) seeding elements for surface seed planting
The seeding element for surface seed planting has a standard equa-
lizer with rubber wheels: the one at the front is a "sod crusher" with a
rounded shape (having Ø=280 mm), followed by the seed pressing
wheel, also in rubber, with independent seed coverers (fi g. 36).
For different soils, 2 different types of seed covering element are
available (fi g. 37):
1) rubber "V" wheels suitable for damp and diffi cult soils;
2) farmfl ex wheel (Ø=370 mm) suitable for damp and sandy soils.
fi g. 36
fi g. 37
2

for fi nely prepared ground it is advisable to use cutter/planter
shoes with sod breaker and press wheels (fi g. 33);
for rougher ground and where there are residues, it is more
advisable to use double disc tools placed upstream of the
cutter/planter shoes followed by press wheels (fi g. 34);
soils;
1 2
cod. G19501383