Menu Options - Lutron QSG-3PCE Guide D'utilisation

Menu Options

Timeclock
•
View events
See page 26
• Add events
Copy all timeclock events from one day
to another
• Copy schedule
Copy all timeclock events from one day
to another
• Delete events
See page 26
• Delete schedule
Delete all timeclock events from a
specified day
• Holiday
See page 27
• Time & date
See page 23
• Location
See page 24
• Set DST
See page 24
• Enable/Disable
Enable or disable timeclock events
Scene setup
• Levels
See page 16
• Labels
See page 17
Save mode
See page 28
Occ sensor
See page 29
R
Zone setup
• Load type
See page 8
• High end
See page 9
• Low end
See page 9
• Min level
See page 9
• Label
See page 14
Shade labels
See page 22
IR
• Enabled
Enable control of the GRAFIK Eye by IR
(remote control palm pilot,wired IR device, etc.)
• Disabled
Disable control of the GRAFIK Eye by IR
(remote control palm pilot,wired IR device, etc.)
Backlight
• Off
Turn off the green backlights on the scene and shade buttons
• On
Turn on the green backlights on the scene and shade buttons
Diagnostics
Diagnostics are for advanced use only. For help, contact
Lutron Technical Support.
• Device serial
Displays the serial number of the GRAFIK Eye
• Link details
Displays diagnostic information for all devices wired on the link
• Code rev
Displays the software versions of the different components within the GRAFIK Eye
• USB status
Displays diagnostic information for the GRAFIK Eye USB
• Reset USB
Resets the USB module on the GRAFIK Eye (used if having trouble communicating)
GRAFIK Eye QS System Installation and Operation Guide 34
®