Lutron QSG-3PCE Guide D'utilisation page 25

Timeclock Operation
Add an Event
Main menu
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight "Timeclock" and press the OK
Timeclock
Timeclock
button to accept.
Scene setup
3. Use the master buttons to highlight "Add events" and press the OK
button to accept.
4. Use the master buttons to select the day of the week for this event;
Timeclock
press the OK button to accept.
5. Use the master buttons to select the type of event (fixed time of
View events
day, or relative to sunrise or sunset); press the OK button to accept.
Delete events Add events
6. For a fixed-time event, use the master buttons to select the hour for
your event to begin; press the OK button to accept. Repeat for the
Add
minutes.
For a relative time event, use the master buttons and the OK button
Monday
to set the hour, then the minutes relative to sunrise or sunset
(maximum of 1 hour 59 minutes before or after sunrise or sunset).
7. Use the master buttons to select the scene you wish to activate for
this event.
Add
For a timeclock event involving only shades, scroll through the
scenes to find the group of shades and the action (1, 2, or 3; open,
Time of day
preset, or close) you want to add to the timeclock event.
Or, press the button on the shade column that produces the action
you want to add to this timeclock event.
Press the OK button to accept.
Add
8. The info screen will display a confirmation screen that your event
has been saved.
Del: 00 AM
08
9. Exit programming mode (see page 12).
Add
Saved
Scene Scene 1
R
Saved
GRAFIK Eye QS System Installation and Operation Guide 25
®
Master
buttons
OK
OK
button