Lutron QSG-3PCE Guide D'utilisation page 26

Timeclock Operation
Delete an Event
1. Enter programming mode (see page 12).
Main menu
2. Use the master buttons to highlight
Timeclock
Timeclock "Timeclock" and press the OK button to
Scene setup
accept.
3. Use the master buttons to highlight
"Delete events" and press the OK button
Timeclock
to accept.
4. Use the master buttons to select the day
Copy schedule
of the week (or holiday) when the event
Delete events Delete
occurs; press the OK button to accept.
5. Use the master buttons to select the
Delete
event to delete; press the OK button to
accept.
Monday 6. A screen will appear, verifying you wish to
delete the event. Press the OK button to
accept and delete; otherwise, press the
timeclock button to go back.
Delete
7. The info screen will display a
01/03
confirmation screen that your event has
8:00 AM
been deleted.
Scene 5
8. Exit programming mode (see page 12).
Delete?
Saved
Saved
R
View an Event
Timeclock 1. Enter programming mode (see page 12),
select "Timeclock," and select "View
View events
events".
Delete events
Add events 2. Use the master buttons to select the day
of the week (or holiday) when the event
occurs; press the OK button to accept.
View events
3. Use the master buttons to select the
event to view; press the OK button to
Monday
Monday
accept.
4. Press the OK button to return to the
Timeclock menu.
View
5. Exit programming mode (see page 12).
01/03
8:00 AM
Scene 5
GRAFIK Eye QS System Installation and Operation Guide 26
®
Master
buttons
OK
OK button
Timeclock
button