Atag OX6411B Mode D'emploi page 72

CLEANING AND CARE
EN 18
Changing the lamp
• Danger of electric shock!
Before replacing any of the oven light bulbs, take the following steps:
1. Switch oven Off.
2. Disconnect the oven from the mains.
3. Protect the oven light bulb and the glass cap by laying a cloth on
the bottom of the oven compartment.
Bulbs can be purchased from the ATAG Customer Service.
Rear oven lamp
1. Remove the cap by turning anticlockwise and remove
the metal ring, the sheet ring and clean the glass cap. If
necessary, replace the bulb with a 25 watt, 230 V, 300 °C
heat-resistant oven light bulb.
2. Clean the glass cap, the metal ring and the sheet ring if
necessary.
3. Fit the metal and the sheet ring to the glass cap.
4. Place the glass cap where you have removed it in step 1 and
turn it clockwise to keep it in place.