Atag OX6411B Mode D'emploi page 71

CLEANING AND CARE
Door removal
For normal use, the oven door must not be removed but if removal
is necessary, for example, for cleaning purposes, follow these
instructions. CAUTION: The oven door is heavy.
Door glass removal
The oven door is equipped with three sheets of glass placed against
each other. These sheets can be removed for cleaning.
• When assembling the inner glass 1, put printing to the lower
1 Open the door and fl ip open the clips at both hinges
completely.
2 Close the door by approximately 70°. With both
hands, grasp the sides of the oven door at its middle
and pull-lift until the hinges can be taken out.
1 Remove the two screws on the left and right sides of the
door.
2 Detach the covering and remove glass 1 from the door.
3 Lift glass 2 and remove the two holder glass rubbers from
the top of the sheet. Clean the sheets with warm water or
washing-up liquid and polish dry them with a soft clean
cloth.
direction.
EN 17