External Control Out Setting - Panasonic AW-RP555L Mode D'emploi

Operation
wEXTERNAL CONTROL OUT setting
Set this to ON when connecting the AW-DU600 dial up adapter to the control panel's TO
PAN/TILT HEAD 1/EXT connector. Normally, set it to OFF.
1. Press the LAMP button while holding down the MEMORY button.
2. The LAMP button's lamp starts flashing, and the standby status is established.
3. Press the LAMP button to establish the setting mode. The lamps of both the MEMORY
button and LAMP button start flashing, and the status currently set is indicated as
follows:
When the PRESET 5 button lamp is lit:
EXTERNAL CONTROL OUT ON
When the PRESET 10 button lamp is lit:
EXTERNAL CONTROL OUT OFF
4. Press the PRESET 5 button to set to EXTERNAL CONTROL OUT ON.
Press the PRESET 10 button to set to EXTERNAL CONTROL OUT OFF.
The lamps of both the MEMORY button and LAMP button stop flashing, and the setting
mode is exited.
24 (E)