Before First Use - Zanussi ZWQ 71235SI Notice D'utilisation

If you set also the Extra Rinse function (
appliance adds two or more rinses.
The related indicator comes on.
DRAIN AND SPIN
With this option you can perform the spin and drain
cycle.
This spin phase is suitable to the washing
programme you set.
If you set also the No Spin (
option, the appliance only drains.
FINISH IN
With this option you can set the number of hours in
which you would like your washing programme to
be completed.
SETTINGS
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
• To activate/deactivate this option touch the
buttons and
indicator comes on/goes off.
CHILD LOCK
With this option you can prevent that the children
play with the control panel.
• To activate/deactivate this option, touch the
buttons and
indicator comes on/goes off.
Activate this option after you touch the button
the buttons are locked (except for the button

BEFORE FIRST USE

1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
1) See in "Settings" how to activate this option.
) the
)
at the same time until the
at the same time until the
You can set from minimum 3 hours to maximum 20
hours.
The display shows the number of hours and the
indicator above the button
EXTRA RINSE
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
This option stays active even when you
switch off the appliance.
ACOUSTIC SIGNALS
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons
seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
:
) .
This removes all possible dirt from the drum and the
tub.
is on.
1)
and at the same time for 4
9