How To Run A Wash Cycle; Daily Use - Zanussi ZWY 1100 Notice D'utilisation

Dispenser box

How to run a wash cycle?

Using for the first time
• Ensure the electrical and water connections com-
ply with the installation instructions.
• Remove the polystyrene insert and all other items
inside the drum.

Daily Use

Loading washing
• Open the lid of the ap-
pliance.
• Open the drum by de-
pressing the locking
button A: The two
shutters unlock auto-
matically.
• Load the washing,
close the drum and the
lid of your washing machine.
Warning! Before closing the lid of your appliance,
ensure that the drum is properly closed :
• When the two shutters are closed,
• locking button A released.
Proportioning of detergents
Pour the amount of washing powder into the washing
and prewash compartments if you have selected the
"prewash" option. Pour fabric softener into the compart-
4
1
2
3
4
5
A
1.
Softener (do not fill above the MAX symbol
2.
Bleaching agent can be used on Cotton pro-
grammes without prewash - 1/4 to 1 glass of dilu-
ted bleach (do not fill above the MAX symbol)
3. Wash
4. Prewash
5. Fabric softener and bleach overflow (if overfilled)
• Run an initial wash cycle at 90°C, without any
washing but with detergent to clean the water
tank.
ment and bleach into the compartment
ry (available on programmes Cotton without prewash).
Selection of desired programme
Turn the programme selector to the required programme.
The "Start/Pause" pushbutton flashes green.
If you turn the programme selector to another programme
while a cycle is in progress, the appliance will ignore the
new selected programme. The "Start/Pause" pushbutton
flashes red for a few seconds.
Selecting the spin speed
Press the "Spin" pushbutton to change the spin
speed, if you want your washing to be spun at a different
speed to the one selected by the appliance. can also select
"Rinse hold" .
Rinse hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing.
At the end of the programme, if you have selected the
"Rinse hold" , you then need to select a "Spin" or "Drain"
programme to finish the cycle and empty the water.
)
if necessa-