EN
90
Problem
The power goes out when
the treadmill is inclined
or lifted
The belt cannot stay at the
center when operating
Noise occurs at the front
side when the treadmill is
operating
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU
this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information
about recycling of this product, please contact your local
council or your household waste disposal service.
DECLARATION OF CONFORMITY
Producer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin,
Germany.
This product is conform to the following European
Directives:
2014/35/EU (LVD)
2011/65/EU (RoHS)
2014/53/EU (RED)
Possible Cause
Make sure the power cord is not pulled to loose when the
treadmill is inclined or lifted.
Make sure the belt is not loose. Please adjust the belt to
the appropriate tightness if it's loose.
The treadmill is not placed on a level location and loses
its balance.
Please check if the machine is level.