Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
35
6.2
glass door removal / installation
Before the glass door can be removed, the surround with
EN
safety screen must be removed, see "SAFETY SCREEN
HANDLES
REMOVAL / INSTALLATION" section.
The glass door is secured to the top front edge of the
appliance with two latches. Pull the handles of the latches
forward, then lift the latches out from the door frame to
release the top of the door. Next, pivot the door forward
until the top edge clears the front of the appliance.
Carefully grip the sides of the door lifting it out from the
retainer along the bottom of the door.
NOTE: These latches make up the spring relief
system for the appliance. Ensure they open freely
and close sealed.
Reverse these instructions to reinstall the door and
surround with safety screen. Ensure the surround with
safety screen is installed correctly.
W415-2197 / A / 09.14.17
Publicité
Chapitres
Table des Matières
