Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
32
5.4
non-combustible facing material
EN
A
A
WARNING: 2" (51mm) clearance from the surround is required for any additional projecting out a
maximum 2" (51mm). If greater projections are desired, increase the clearance from the surround by 2"
(51mm) for every 1" (25mm) of additional projection.
5.5
alcove installation
NOTE: Recesses or alcoves above the appliance can be made as deep as desired provided the minimum
clearances to combustibles are maintained.
Non-combustible material can be used, provided the minimum clearances to combustible materials are applied.
The minimum enclosure volume must be increased by no less than the volume of the recess. This adjustment
can be made by increasing any or all of the height, width and depth of the enclosure.
W415-2197 / A / 09.14.17
6" (152mm)
4" (102mm)
2" (51mm)
RECESS OR
ALCOVE
AREA
ENCLOSURE
AREA
APPLIANCE
4"
(102mm)
3" (76mm)
2" (51mm)
TOP OF
APPLIANCE
0" (0mm)
SAFETY
DOOR
SCREEN
SECTION A - A
71.2
Publicité
Chapitres
Table des Matières
