Zeiss Axio Observer Mode D'emploi Succinct page 3

Axio Observer
1 PRELIMINARY NOTE
This quick reference guide contains important information on device safety, the intended use of the
device and how to use it safely. The complete operating manual contains further information on usage,
maintenance, changing fuses and troubleshooting.
The complete Axio Observer operating manual is available for download at
www.zeiss.com/Axioobserver
2 COMPLIANCE NOTICE
The Axio Observer microscopes:
have been designed, produced and
tested in compliance with
and meet the requirements of the
The Axio Observer models 3, 5, 7
also meet the
as well as the
The Axio Observer models 3 materials, 5 materials, 7 materials
also meet the
as well as the
Instrument identification marking
Instrument disposal according to
09/2017
PRELIMINARY NOTE
DIN EN 61010-1 (IEC 61010-1) "Safety requirements for
electrical equipment for measurement, control and
laboratory use"
"RoHS Directive" 2011/65/EG
DIN EN 61010-2-101 "Safety requirements for electrical
equipment for measurement, control and laboratory use -
Part 2-101: Special requirements for In Vitro Diagnostic (IVD)
medical devices"
98/79/EC Appendix 1 for IVD products (In Vitro Diagnostic)
"Low voltage directive" 2014/35/EU
"EMC requirements" 2014/30/EU
mark
EU Directive 2012/19/EC (WEEE).
431004-6044-008
ZEISS
1