Disposal Of The Packaging; Handling And Operation; Wirelessly Charging A Mobile Phone - Tronic TLD 2 A1 Mode D'emploi

Disposal of the packaging

The packaging materials have been selected
for their environmental friendliness and ease of
disposal and are therefore recyclable. Dispose
of packaging materials that are no longer needed in
accordance with applicable local regulations.
Dispose of the packaging in an environmentally
friendly manner. Observe the labels on the
different packaging materials and separate them
as needed. The packaging material is labelled
with abbreviations (a) and numbers (b) with the following
meanings: 1–7: plastics, 20–22: paper and cardboard,
80–98: composites.

Handling and operation

Wirelessly charging a mobile phone

CAUTION
► Operate the charging pad only in dry interior rooms.
► Due to the high power consumption, a USB mains
adapter must be used to operate the charging pad.
Do not use the charging pad on a USB port of a
PC or notebook.
► Use only USB mains adapters with a suitable output
voltage and output current for the charging pad (see
section Technical data).
► The charging power depends on the USB mains
adapter used. A maximum of 2x10 W is possible.
► Remove the connection cable
finished charging.
♦ Connect the USB-A plug on the connection cable
to a suitable USB mains adapter (not supplied).
TLD 2 A1
6
after you have
GB │ IE
6
│
9 ■