Initial Use; Items Supplied And Transport Inspection; Disposal Of The Packaging; Operating Components - Tronic TLG 500 B1 Mode D'emploi

Initial use

Items supplied and transport inspection

GB

Disposal of the packaging

Operating components

LEDs (Operating status indicators)
Loading slots for 9V blocks (loading slots 5 and 6; see fold-out page)
Loading slots for types AAA/AA/C/D (loading slots 1 to 4; see fold-out page)
30
The device is delivered with the following components as standard:
▯ Battery Charger
▯ This operating manual
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the items supplied are incomplete, or damaged due to defective packaging
or transportation, contact the Service Hotline (see section Service).
♦ Remove the device and the operating instructions from the carton.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing.
There is a risk of suff ocation!
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated. Dispose of packaging material
that is no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device ideally for its return.
TLG 500 B1