Sanremo ROMA TCS SED Mode D'emploi page 62

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
the display shows:
Where XXX may be ENABLE/DISABLE
where XXX are the numbers that make up the telephone number.
After having programmed the SERVICE PHONE, press K5GR1 (MENÙ) to move on to the next parameter; this takes you to the setting of the type of
KEYBOARD used on the doser and it applies to all the keyboards used for the three groups.
the display shows:
Select "Esp - Caf - 2Es - 2Caf" when the keyboards used
are of the type:
Select "Esp - 2Es - Cof - 2Cof" (pressing the buttons K1GR1
"+" o K2GR1 "-" to display the preferred option) when the
keyboards used are of the type:
the display shows:
After having set the type of keyboard, pressing the button
K5GR1 (MENU) allows you to move on to the display where
you can enable or disable the programming of the doses
the display shows:
where xxx may be "DISABLE" or "ENABLE"
If you want to modify the parameter, press the buttons K1GR1 (+) or K2GR1 (-).
After having finished the setting, pressing the button K5GR1 (MENU) allows you to move on to the display where you can enable or disable
continuous dose distribution.
the display shows:
where xxx may be "DISABLE" or "ENABLE"
If you want to modify the parameter, press the buttons K1GR1 (+) or K2GR1 (-).
After having finished the setting for enabling or disabling the "continuous" dose, pressing the button K5GR1 (MENU) allows you to move on to the
display where you can choose to associate the pump with tea distribution.
the display shows:
where YY may be "NO" or "YES"
If you want to modify the parameter, press the buttons K1GR1 (+) or K2GR1 (-).
After having finished the setting for enabling or disabling tea with the pump, pressing the button K5GR1 (MENU) allows you to move on to the
display where you can choose the function for setting the keyboard where the button K6Grx will command not tea but steam.
the display shows:
where x may be ''0'' or "1" or "2" or ''3''
0 = disabled
If you want to modify the parameter, press the buttons K1GR1 (+) or K2GR1 (-).
After having finished the setting for choosing the keypad for the steam button, pressing the button K5GR1 (MENU) allows you to move on to the
display for choosing the duration of steam wand washing.
Disp. Temperat.
xxxxxxxxxx
Keyboard type
Esp Caf 2Es 2Caf
6 BUTTON KEYBOARD
Keyboard type
Esp 2Es Caf 2Caf
6 BUTTON KEYBOARD
Doses setting
xxxxxxxx
Continuos
xxxxxxxx
Tea whit Pump
YY
Steam Boiler Gr.
x
62
5 BUTTON KEYBOARD
6 BUTTON KEYBOARD
5 BUTTON KEYBOARD
6 BUTTON KEYBOARD

Publicité

Table des Matières
loading

Table des Matières