Assembly - Blumfeldt Goldflame Style Mode D'emploi

EN
32

ASSEMBLY

Required tools (not supplied):
Phillips screwdriver
Leak detection solution:
1 part detergent + 3 parts water
• Assemble all nuts and bolts loosely at first. Tighten all connections after
completion of assembly. This eases your work and increase the stability of
the appliance.
• Before assembly, make sure all packing material and any transmit
protection must be removed.
• Small deviations in equipment may occur. This is no lack of quality but
subject to improvements.
• If any part is missing or damaged, do not attempt to assembly this product,
Contact customer service for replacement parts.
• Assembly should be performed on a flat, level, non-abrasive surface.
• To improve stability, the preassembled base can be filled with sand (not
included).
• Estimated assembly time: 30 minutes.