Assembly - Blumfeldt Goldflame Deluxe Mode D'emploi

AA
BB
CC
DD
EE
FF

ASSEMBLY

1. Find a large, clean area to assemble your appliance. Please refer to the
parts list and assembly diagram as necessary.
Please use protective gloves when assem-bling this product.
2. To avoid losing any small component or hardware, assemble your product
on a hard level surface that does not have cracks or openings.
3. To avoid damage to soft floor or carpet, do not assemble or move the
appliance on soft floor or carpet.
4. Follow all steps in order to properly assemble your product.
5. Assemble your product.
Make sure all the plastic protection rip off before assembling.
Do not force parts together as this can result in personal injury or damage to
the product. When applicable, tighten all hardware con-nections by hand first,
once the step is com-pleted, go back and full tighten all hardware. Caution:
Whilst every effort has made in manufacture of your appliance to remove any
sharp edge, you should handle all com-ponents with care to avoid accidental
injury.
Tools required (not supplied)
• Philips screw driver
• Wrench
7x8x85 mm
ø
ø
ø
ø
, , ,
x3 1/1
1/1
x3
1/1
x16
x5 1/1
x3 1/1
x3
1/1
EN
25