WAGNER AG-19 Mode D'emploi page 25

Adjusting the Packing Seal Assembly
There is a hole in the cap (1). If coating medium is discharged
i
from this hole, the packing requires adjustment
1. Unscrew the cap (1) with a screwdriver, then remove the spring (2).
2. Use box spanner 10 mm (4) to turn the pressure plate a quarter turn to
the right.
3. Replace the spring (2) and tighten the cap (1) as far as the stop.
If the problem persists, please consult your WAGNER service center.
AG 19
GB
3
2
1
25