HQ Power VDPDMXC146 Mode D'emploi page 4

22. REC EXIT
Press this button to add or kill a channel. The LED indicator is lit when the device is
in kill mode. Press an arbitrary flash button to reduce all channel output levels to
zero, with the exception of the selected channel. This button also deactivates the
recording mode.
23. RECORD
Press this button to record a step in a programme.
24. PAGE
Select the desired scene or chase on the selected page (1 – 4).
25. MODE SELECT
In the CHASE/SCENES mode, you can press this button to choose between the
DOUBLE PRESET or SINGLE PRESET mode.
26. DARK
For a blackout of all channels, including the ones that are currently in FULL ON and
FLASH mode.
27. ALL REV
Reverses the direction of a chase.
28. 0% or 0-255
Switches the display from 0-100% to 0-255 and vice versa.
29. REV ONE
Hold this button and press any button of PRESET B. The selected scene will now
chase in reverse.
30. CHASE REV
This button enables you to reverse the chase controlled by the SPEED slider.
31. BEAT REV
This button enables you to reverse the chase to the beat of the music.
b) Back Panel
VDPDMXC146
Fig. 2
4 VELLEMAN