Mounting Material; Overview - Parkside PTK 2000 B2 Traduction Des Instructions D'origine

GB IE
- Suction hose
- Suction adapter with rubber seal
- Riving knife with laser
- Batteries 1.5V AAA (2x)
- Parallel stop
- Stop rail
- Transverse stop
- Table width extender (2x)
- Table length extender
- Push stick
- Legs (4x)
- Cross struts (2x)
- Longitudinal struts (2x)
- Central struts, short (2x)
- Central struts, long (2x)
- Rubber feet (4x)
- Stand brackets (2x)
- Table supports, short (4x)
- Table supports, long (2x)
- Translation of the original instructions for use

Mounting Material

- Bag A for legs and central struts: Hexago-
nal bolt with mounted washer/
spring washer (f), 8 pieces;
Hexagonal bolt (g) = lock
washer (b), 2x washer (a), nut
(c), 4 pieces;
Round head bolt, M6 x 12 (e) =
washer (a), lock washer (b), nut
(c), 8 pieces each
- Bag B for stand bracket and upper struts:
Round head bolt, M6 x 12 (d) =
washer (a), lock washer (b), nut
(c), 20 pieces each
- Bag C for table length/width extension:
Hexagonal bolt with mounted
washer/spring washer (f),
12 pieces;
Hexagonal bolt (g) = lock
washer (b), 2x washer (a), nut
(c), 6 pieces
34
Tools
- Jaw spanner SW 22
- Hexagon socket wrench HX 6
- Jaw spanner SW 8/10
The illustrations are on the
fold-out pages.

Overview

1 Saw table
1
2 Blade guard
3 Suction hose
4 Riving knife
5 Saw blade
6 Table insert
7 Table width extender
8 Transverse stop
9 Locking handle
10 Base
11 On/off switch
12 Handwheel
13 Guide rail
14 Parallel stop
15 Table length extender
16 Suction adapter with Rubber seal
17 Push stick
18 Legs
19 Cross struts
20 Longitudinal struts
21 Central struts, short
22 Central struts, long
23 Rubber feet (4x)
24 Stand brackets (2x)
25 Table brackets, short
26 Table brackets, long
27 Bolt with wing nut
28 Slot in the riving knife
29 Countersunk screws of the table
insert
30 Fixing bolts of the riving knife
31 Cam lever
32 Groove
33 Knurled screw
34 Laser