Important Safty Information; Leak Testing - BORETTI Michelangelo Notice D'emploi

is accidentally activated, turn off cylinder
valve and appliance valves, wait 10 seconds
to allow the device to reset, open cylinder
valve slowly, then open the appliance valve.
important safety
information
The pressure regulator and hose assembly sup-
plied with this outdoor cooking appliance must
be used. Replacement pressure regulators
and hose assemblies must be those specified
by the outdoor cooking gas manufacturer.
A. Do not store a spare lp-gas cylinder under
or near this appliance.
B. Never fill the cylinder beyond 80% full.
If the information in "a" and "b" is not followed
exactly, a fire causing death or serious injury
may occur.
Leak test
1. Do not use or permit sources of ignition in
the area while doing the leak test. This in-
cludes smoking.
2. Leak testing should be done once per year
or whenever the lp gas cylinder or any other
gas system part is replaced, whichever is
more frequent.
3. The leak testing solution should be half li-
quid detergent and half water.
4. Apply the solution to all connections, the
hose and the lp gas cylinder.
5. Bubbles in the soap solution indicate that a
leak is present.
6. The leak(s) must be stopped by tightening
the loose joints, if possible, or by replacing
the faulty parts(s) with the part(s) recom-
mended by the appliance manufacturer.
The appliance is not to be used until any leak is
corrected.
A gas appliance repairman or lp gas dealer
should be called if attempts to stop the leak(s)
are unsuccessful and, in such case, the lp gas
supply must be shut off at the cylinder valve
or the cylinder must be removed from the ap-
pliance until the leak(s) is corrected.
NL
FR
ES
EN
61