Declaration Of Conformity - Evolution RAGE2 Instructions D'origine

www.evolutionpowertools.com
EC DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2004
The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC. Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive.
2011/65/EU. The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC as
The Waste Electrical and Electronic Equipment (WEEE) Directive.
amended by
2003/108/EC .
And is in conformity with the applicable requirements of the following documents:
EN13898:2003+A1:2009
EN 60204-1:2006+ A1:2009
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001:A2:2008
EN 61000-3-2:2014
EN 61000-3-11:2000
Product Details
Description: RAGE2 355mm (14") MULTIPURPOSE CHOP SAW
Evolution Model No: UK 230V: 085-0001, UK 110V: 085-0002, EU: 085-0003, EU: 085-0003A
Brand Name: EVOLUTION
Voltage: 230 - 240v ~ 50Hz
Input: 2200W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
Print: Matthew Gavins - Group Chief Executive
01/02/2017
23
EN
ES
FR