Declaration Of Conformity; Product Details - Evolution RAGE8 Instructions Originales

EC DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2004
The manufacturer of the product covered by this declaration is:
Evolution, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all
the relevant provisions of the Machinery Directive and other appropriate directives as detailed
below. The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC Machinery Directive.
2004/108/EC
Electromagnetic Compatibility Directive.
2014/30/EU
Electromagnetic Compatibility Directive.
93/68/EC The CE Marking Directive.
2011/65/EU
The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC as
The Waste Electrical and Electronic Equipment (WEEE) Directive.
amended by
2003/108/EC
And is in conformity with the applicable requirements of the following documents:
EN 55014-1:2006+A1+A2
EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2013
EN 60745-1: 2009+A11
EN 60745-2-11: 2010

Product Details

Description: RAGE8 RECIPROCATING SAW
Evolution Model No: 045-0001 (230V UK), 045-0002 (110V UK)
Brand Name: EVOLUTION
Voltage: 230V ~ 50 Hz, 110V ~ 50 Hz, 120V ~ 60 Hz
Input: 1050W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
www.evolutionpowertools.com
Print: Matthew Gavins - Group Chief Executive
01/03/16
20