Service Call Message; Contacting Your Local Authorized Canon Dealer - Canon imageRUNNER 2422 Guide De L'utilisateur

Service Call Message

If the machine malfunctions, a service call message appears on the LCD display.
Examples: E000, E100

Contacting Your Local Authorized Canon Dealer

If a service call message appears on the LCD display, follow the procedure
described below to solve the problem.
WARNING
Do not connect or disconnect the power cord with wet hands, as this may result
in electrical shock.
CAUTION
Always grasp the power plug portion when disconnecting the power cord.
Pulling on the cord may expose or snap the core wire or otherwise damage the
power cord. If the power cord is damaged, this could cause current to leak,
resulting in a fire or electrical shock.
IMPORTANT
If the main power switch is turned OFF, all jobs waiting in the memory will be erased.
1
Turn the main power switch OFF.
Wait at least 10 seconds before
turning the main power switch
back ON.

Service Call Message

4
4-11