Disassembly - Sera MU- 300 E 187.2 Mode D'emploi

Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions

7.2 Disassembly

The electric agitator may only be disassembled when the tank is empty.
Observe safety data sheets and warning notices for the stirred medium.
During operation, the agitator shaft may become hot at the flange. Let it cool after operation.
Loosen the screw connection with the tank.
■
2 people are required for disassembly of the electric agitator:
The electric agitator is lifted at the drive by one person and held at the agitator shaft by a second person to
■
prevent it from falling down.
Loosen the protective cover from the drive.
■
Undo the locking ring.
■
Loosen and unscrew the oblique blade agitator with M16 thread with slight blows of a plastic hammer.
■
Loosen the locking screws in the hub connection of the oblique blade agitator (model B) and pull off from
■
the agitator shaft.
Remove the agitator shaft and the oblique blade agitator out of the tank.
■
TA 504 Vers. 3 en 11/2021
Subject to technical modifications! www.sera-web.com
49