Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions
15. Certificate of non-objection
Inspection / repair of machines and machine parts is only carried out after the opposite
clearance certificate was filled in correctly and completely by authorized and qualified
personnel.
NOTE!
All industrial companies are obligated by the legal provisions for occupational health, e.g. the workplaces ordinances,
the Ordinance on Hazardous Substances, the regulations for prevention of accidents and the environmental protection
regulations such as the Waste Management Act and the German Household Water Act to protect their employees or man
and the environment from detrimental effects when handling hazardous substances.
Should special safety precautions be necessary despite careful draining and cleaning of the product
the necessary information are to be provided.
Machines which are operated with radioactive media shall only be inspected and/or repaired in the safety area
of the owner by a sera employee.
The clearance certificate is part of the inspection-/repair order.
sera reserves the right to refuse acceptance of the order for other reasons.
DOWNLOAD
Clearance certificate
Or directly scan
the QR code opposite:
TA 504 Vers. 3 en 11/2021
Subject to technical modifications!
Clearance Certificate
RECIPIENT
sera ProDos GmbH
Wareneingang z. Hd. Abt. Service
sera Straße 1
D-34376 Immenhausen/Hessen
SENDER
Company:
Phone:
Contact partner:
Fax:
Street address:
E-Mail:
Postcode, City:
Your order number:
We confirm that we have entered the information in this clearance certificate (decontaminati-
on certificate) correctly and completely and that the returned parts have been carefully cleaned.
The parts sent in are therefore free of residues in dangerous quantities.
Place, Date
Department
www.sera-web.com
www.sera-web.com
Signature (and company stamp)
55
Publicité
Chapitres
Table des Matières
