Foreseeable Misuse; Transport; Assembly And Installation; Commissioning - Sera MU- 300 E 187.2 Mode D'emploi

Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions

2.11 Foreseeable misuse

The following types of misuse are assigned to the life cycles of the machine.
DANGER!

2.11.1 Transport

Tipping behaviour during transport, loading and unloading ignored.
■
Weight underestimated during lifting.
■
Protective equipment insufficient or missing.
■

2.11.2 Assembly and installation

Power supply not fuse protected (no fuse/fuse too large, power supply not conforming to standards).
■
Installation of the electric agitator at an unsuitable site (outside, direct sunlight, explosible region etc.)
■
Unit not sufficiently fixed during the installation / tilting of the machine.
■
Non-conforming electrical connection (without earth conductor, mains not fuse-protected,
■
wrong sense of rotation etc.)
Protective equipment insufficient or missing.
■

2.11.3 Commissioning

Non-compliance with the design data/operating conditions (medium, temperature etc.).
■
Non-observance of the electrical characteristics (motors, sensors).
■
Covering of vent openings (motor).
■
Start-up a with damaged system.
■
Protective equipment insufficient or missing.
■

2.11.4 Operation

Electric agitator not sufficiently fixed.
■
Fault message ignored ► process error.
■
Insufficient lighting of the working place.
■
External fuse bridged ► no cut off in case of an error.
■
Unauthorised modification of the electric agitator (internal protection, installed brackets ...).
■
Unit operated within the critical speed range.
■
Protective equipment insufficient or missing.
■
TA 504 Vers. 3 en 11/2021
Misuse can result in danger to the operating personnel.
Subject to technical modifications! www.sera-web.com
37