Unauthorised Alteration; Improper Operation; Intended Use - Sera MU- 300 E 187.2 Mode D'emploi

Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions

2.6 Unauthorised alteration

Modifications of and changes made to the electric agitator require the permission of the manufacturer.
ATTENTION!

2.7 Improper operation

The operational reliability of the electric agitator is only guaranteed if the product is used as intended and accord-
ing to the descriptions in the Chapter "Intended use".

2.8 Intended use

The sera electric agitators are used to homogenise and agitate the mixture and may only be used for the intended
purpose specified in the product description and the acceptance certificate.
If the electric agitator is to be used for other applications, the suitability of the mixing unit for the new operating
conditions must be clarified with sera.
Criteria for proper use of the electric agitator:
Observe characteristics of the mixture (please see safety- and product data sheet of the mixture used –
■
the safety data sheet is to be provided by the supplier / owner of the mixture).
The material resistance of the agitator against the mixture is to be ensured prior to commissioning.
■
Operating conditions at the place of installation
■
Pressure and temperature of the mixture.
■
Power supply
■
Place of installation (environmental conditions)
■
sera does not assume any responsibility if these criteria are not or only partly observed by the owner / operator.
TA 504 Vers. 3 en 11/2021
Unauthorised modification of the electric agitator will void any
warranty claim against the manufacturer.
Subject to technical modifications! www.sera-web.com
35